Formulation Concept: Eye Contour Cream with Phenoliva Active

Formulation Concept: Eye Contour Cream with Phenoliva Active

Eye Contour Cream

Ingredient INCI % w/w
Phase A
Deionised Water Aqua 78.910
Glycerine 1.26 (mini 99.5%) Glycerin, Aqua 5.000
Phase B
Carbopol Ultrez 30 Polymer Carbomer 0.250
Phase C
Montanov 202 Arachidyl Alcohol, Behenyl Alcohol, Arachidyl Glucoside 3.000
Vegelight 1214LC Coconut Alkanes, Coco-Caprylate/Caprate 10.000
Phase D
Stabil Zero Pentylene Glycol, Caprylyl Glycol, Ethylhexyglycerin 1.500
Phase E
Phenoliva Active 10 Olea Europaea Fruit Extract, Aqua, Citric Acid 1.000
Phase F
Sodium Hydroxide 30% Aqua, Sodium Hydroxide 0.340
Total 100.000

Procedure

  1. Add Phase A to the main vessel and heat to 80°C.
  2. Disperse Phase B into Phase A under vacuum until homogeneous. Beware of lumps. Mix again for 7 min if lumps are still present.
  3. In another container, heat Phase C to 80°C while stirring. Once it reaches 80°C, add it to the main vessel and disperse under vacuum for 15 min until a homogeneous mixture is obtained. Start the cooling system during the next 5 min of homogenization. Cool the mixture to T<30°C.
  4. Add Phase D to the main vessel. Shake under vacuum for 10 min until homogeneous.
  5. Add Phase E to the main vessel. Shake under vacuum for 10 min until homogeneous.
  6. If necessary, adjust the pH to between 5 and 5.5 with Phase F.

The information contained in this document and the various products described are intended for use only by persons with appropriate technical knowledge and at their own discretion after they have made the necessary tests and evaluations of the products and their uses. All information and data contained herein are believed to be accurate and reliable, but are not to be construed as warranties of merchantability or fitness for a particular purpose or as representations, express or implied, for which GaiaTech assumes any legal responsibility. We do not warrant that the purchaser's use of any product or formulation described in this document will not infringe any patents.

Back to blog